• Supports Vanadium Oxide uncooled sensor to measure target's temperature • Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: ± 0.5 °C • Recognition distance: 0.5 to 2 m • Fast temperature measurement mode: Detects face and takes temperature without identity authentication • Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc • Face mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid • Forced mask wearing alert: If the recognizing face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed • Displays temperature measurement results on the authentication page • Triggers voice prompt when detecting abnormal temperature • Configurable door status (open/close) when detecting abnormal temperature • Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software • Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99% • 50,000 face capacity, 50,000 card capacity, and 100,000 event capacity • Suggested height for face recognition: between 1.4 m and 1.9 m • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out • Watchdog design and tamper function * Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. * In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.